TECHNIG
Gateway for IT Experts and Tech Geeks

How to Configure IP Address with PowerShell?

The IP address configuration is easy when you configure it using GUI. But do you know how to configure IP address using PowerShell or even command prompt (cmd)? Good if you know, but if you don’t know just follow this step by step article about configuring IP address using PowerShell.

I have written an article about configuring IP address with the command line before. You can read it from configure IP address with CMD or command prompt using Network Shell or Netsh utility.

Configure IP Address using PowerShell

Let’s start configuring IP address with Powershell.

1. Run PowerShell as administrator by searching PowerShell on Windows search and pressing Ctrl+Shift then press enter. It will open the PowerShell as an administrator. Or right click the PowerShell and click Run As Administrator.

2. To display the current system IP configuration type “Get-NetIPConfiguration” and press enter. It works the same as “Ipconfig” on Windows command prompt and “Ifconfigcommand on Linux.

Display IP Configuration with PowerShell
Display IP Configuration with PowerShell

3. The “Get-NetAdapter” command shows all network adapters on your computer. It displays the virtual network adapters as well.

Find Network Adapters with PowerShell
Find Network Adapters with PowerShell

The following command will help you find more information about network adapters. The “Get-NetAdapterHardwareInfo” shows hardware information and…

For example type “Get-NetAdapter | ft Name, DriverFileName, DriverData, DriverDescription“.

Network Adapter Information
Network Adapter Information

There are more parameters for Network Adapter cmdlet, so try to find them with “Get-Help Get-NetAdapter -Detailed” command.

Get help of Network Adapters
Get help of Network Adapters

That’s all, you need to work with PowerShell to learn more about network adapter configuration or configure IP address with PowerShell.

Configure IP Address with PowerShell

Like the old network shell (Netsh), you can configure IP address with PowerShell as well. It’s just changed to PowerShell cmdlet.

1. To change IP address, do it with “New-NetIPAddress“.

New-NetIPAddress -InterfaceIndex 2 -IPAddress 200.100.10.1 -PrefixLength 24 -DefaultGateway 200.100.10.10

Assign IP Address with PowerShell - Configure IP Address Using PowerShell
Assign IP Address with PowerShell – Configure IP Address Using PowerShell

Index 2 is the index number of my network adapter on Windows 10. You can find the index number with “Get-NetAdapter“.

2. To set DNS address use the “Set-DNSClientServerAddress“.

Set-DnsClientServerAddress -InterfaceIndex 2 -ServerAddresses 200.100.10.50

Set DNS Address using PowerShell
Set DNS Address using PowerShell

To set alternate DNS server just add the second DNS address with a comma.

Set-DnsClientServerAddress -InterfaceIndex 2 -ServerAddresses 200.100.10.50, 200.100.10.100

Internet Protocol TCP IPv4 Properties
Internet Protocol TCP IPv4 Properties

To check the result type “Get-NetIPConfiguration” and press enter. It will shows all adapters IP configurations.

Rename Network Adapter

To rename a network adapter, type “Rename-NetAdapter -Name Ethernet -NewName IntConnection” and press enter. The Ethernet is the old name and the IntConnection is the new name.

Rename Network Adapter with PowerShell
Rename Network Adapter with PowerShell

Disable Network Adapter

To disable a network adapter, simply type “Disable-NetAdapter -ifAlias IntConnection” and press enter. Just type Y to disable network adapter with PowerShell.

Disable Network Adapter with PowerShell
Disable Network Adapter with PowerShell

Enable Network Adapter

Do the same as disable the network adapter and replace the disable to enable and press enter to enable network adapter with PowerShell.

Enable Network Adapter with PowerShell
Enable Network Adapter with PowerShell

Done! Hope you learn something about configuring IP address using PowerShell.

3 Comments
  1. Martin says

    Thank you very much. These commands were very helpful.

  2. proxy free list says

    Hello,I log on to your blog named “How to Configure IP Address Using PowerShell? – Technig” daily.Your story-telling style is awesome, keep it up! And you can look our website about proxy free list.

  3. Stew says

    How do you set it back to obtain IP address automatically (DHCP)?

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

where to buy viagra buy generic 100mg viagra online
buy amoxicillin online can you buy amoxicillin over the counter
buy ivermectin online buy ivermectin for humans
viagra before and after photos how long does viagra last
buy viagra online where can i buy viagra